Why is My Iron leaking Brown Water? How to Fix it?

Is your Iron spitting out Brown Water?

It’s frustrating.

In this article, we are going to help you to solve this problem.

Let’s get started:

Why is My Iron leaking Brown Water?

Your Iron is leaking Brown Water because it isn’t able to produce steam or it has Limescale deposits on the steam holes of the Iron. To fix it, Clean your Iron’s Water Tank and check the temperature of the iron.

The main cause of this brown stuff is hard water. It would be best if you found a good steam generator iron for this. You can check out the best Steam Generator Iron for Hard Water Areas in the UK article here.

How to stop brown water coming out of iron

To stop brown water from coming out of the iron you need to follow the below steps:

1, Check for limescale deposits and use the self-clean function

If your iron spits out brown stuff all over your clothes then it’s maybe because of limescale. Limescale is a common problem these days and every kitchen utensil is getting calcium deposited.

But luckily most of the brand comes with a self-cleaning function which will clean the water reservoir automatically. Some of them also collect Calcium and makes beeping sound to clean the depositor.

2. Check the Temperature of the Iron’s Soleplate

If water is dripping from your iron, then maybe it’s having an issue with the heating element. The temperature isn’t enough for the water to convert to steam. Another reason could be a low-temperature setting, for ironing clothes that will burn at high temperatures.

In this case, you should be looking for an iron having anti-drip protection. So even at lower temperatures, the iron will generate the required steam for that temperature setting.

3. Check the Water Quality

If you’re using tap water or bore well water, then in most cases it’ll contain limescale or Calcium deposits, rising the brown staff problem.

For this reason, you can use Distilled Water while ironing. This is the most cost-effective way to save iron from spitting out water.

4. Clean the water tank properly

It doesn’t matter if your iron has a self-cleaning function or not. Cleaning your iron once or twice a week depending upon the usage increases the longevity of your iron.

Here’s how to clean a water tank properly:

• Empty the water tank and disconnect it from the power supply.
• Fill the water tank with vinegar and lemon solution. 1 tablespoon vinegar and 1 teaspoon of lemon juice and 1/3rd of distilled water.
• Set the temperature to the highest setting and wait for the iron to be ready to spray. Many Irons beep when they’re ready to Iron.
• Spray as long as possible and empty the water tank in an old piece of cloth or a kitchen sink.
• Again, fill it with distilled water and spray until the water tank is empty.
• It’s ready to use.

Pro tip: Empty the water tank after use and store it away. Leaving water with the iron makes it easy for Calcium deposits that harm the soleplate.